Recently Viewed

AM7585100 Plain Metric Oilite Bearing

AM7585100 Plain Metric Oilite Bearing
Our Price:  £90.20(Exc. 20% VAT)(£108.24 Inc. VAT)

Weight:  219.30 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM7585100
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  75mm
Outside Diameter:  85mm
Length:  100mm
ID tolerance:  Min: 75.01mm Max: 75.04mm (G7)
OD tolerance:  Min: 85.079mm Max: 85.114mm (s7)
Length tolerance:  Min: 99.73mm Max: 100.27mm (js13)
Recommended shaft tolerance:  Min: 74.94mm Max: 74.97mm (f7)
Recommended housing tolerance:  Min: 85mm Max: 85.035mm (H7)
ID when fitted:  Min: 75mm Max: 75.03mm (H7)
Recommended fitting pin tolerance:  Min: 75.011mm Max: 75.024mm (m5)

Alternative or equivalent part numbers: AM7585-100, AMC7585100, 75/85x100

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark