Recently Viewed

AM556570 Plain Metric Oilite Bearing

AM556570 Plain Metric Oilite Bearing
Our Price:  £50.50(Exc. 20% VAT)(£60.60 Inc. VAT)

Weight:  395.60 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM556570
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  55mm
Outside Diameter:  65mm
Length:  70mm
ID tolerance:  Min: 55.01mm Max: 55.04mm (G7)
OD tolerance:  Min: 65.059mm Max: 65.089mm (s7)
Length tolerance:  Min: 69.77mm Max: 70.23mm (js13)
Recommended shaft tolerance:  Min: 54.94mm Max: 54.97mm (f7)
Recommended housing tolerance:  Min: 65mm Max: 65.03mm (H7)
ID when fitted:  Min: 55mm Max: 55.03mm (H7)
Recommended fitting pin tolerance:  Min: 55.011mm Max: 55.024mm (m5)

Alternative or equivalent part numbers: AM5565-70, AMC556570, GM11X70, 55/65x70

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark