Recently Viewed

AM506050 Plain Metric Oilite Bearing

AM506050 Plain Metric Oilite Bearing
Our Price:  £30.03(Exc. 20% VAT)(£36.04 Inc. VAT)

Weight:  259.10 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM506050
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  50mm
Outside Diameter:  60mm
Length:  50mm
ID tolerance:  Min: 50.009mm Max: 50.034mm (G7)
OD tolerance:  Min: 60.059mm Max: 60.089mm (s7)
Length tolerance:  Min: 49.805mm Max: 50.195mm (js13)
Recommended shaft tolerance:  Min: 49.95mm Max: 49.975mm (f7)
Recommended housing tolerance:  Min: 60mm Max: 60.03mm (H7)
ID when fitted:  Min: 50mm Max: 50.025mm (H7)
Recommended fitting pin tolerance:  Min: 50.009mm Max: 50.02mm (m5)

Alternative or equivalent part numbers: AM5060-50, AMC506050, GM9X50, GH72X50, QM48-50, 50/60x50

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark