Recently Viewed

AM223250 Plain Metric Oilite Bearing

AM223250 Plain Metric Oilite Bearing
Our Price:  £13.86(Exc. 20% VAT)(£16.63 Inc. VAT)

Weight:  127.20 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM223250
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  22mm
Outside Diameter:  32mm
Length:  50mm
ID tolerance:  Min: 22.007mm Max: 22.028mm (G7)
OD tolerance:  Min: 32.043mm Max: 32.068mm (s7)
Length tolerance:  Min: 49.805mm Max: 50.195mm (js13)
Recommended shaft tolerance:  Min: 21.959mm Max: 21.98mm (f7)
Recommended housing tolerance:  Min: 32mm Max: 32.025mm (H7)
ID when fitted:  Min: 22mm Max: 22.021mm (H7)
Recommended fitting pin tolerance:  Min: 22.008mm Max: 22.017mm (m5)

Alternative or equivalent part numbers: AM2232-50, AMC223250, BM15X50, BS180X50, QM34-50, 22/32x50

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark