Recently Viewed

AM050805 Plain Metric Oilite Bearing

AM050805 Plain Metric Oilite Bearing
Our Price:  £0.46(Exc. 20% VAT)(£0.55 Inc. VAT)

Weight:  0.90 g


Incoming, 10-13 days  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM050805
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  5mm
Outside Diameter:  8mm
Length:  5mm
ID tolerance:  Min: 5.004mm Max: 5.016mm (G7)
OD tolerance:  Min: 8.023mm Max: 8.038mm (s7)
Length tolerance:  Min: 4.91mm Max: 5.09mm (js13)
Recommended shaft tolerance:  Min: 4.978mm Max: 4.99mm (f7)
Recommended housing tolerance:  Min: 8mm Max: 8.015mm (H7)
ID when fitted:  Min: 5mm Max: 5.012mm (H7)
Recommended fitting pin tolerance:  Min: 5.004mm Max: 5.009mm (m5)

Alternative or equivalent part numbers: AM0508-05, AMC050805, CM9X5, CT256X5, QM9-5, 5/8x5

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark