Recently Viewed

AM305060 Plain Metric Oilite Bearing

AM305060 Plain Metric Oilite Bearing
Our Price:  £38.28(Exc. 20% VAT)(£45.94 Inc. VAT)

Weight:  440 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AM305060
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  30mm
Outside Diameter:  50mm
Length:  60mm
ID tolerance:  Min: 30.05mm Max: 30.075mm (E7)
OD tolerance:  Min: 50.034mm Max: 50.059mm (r7)
Length tolerance:  Min: 59.805mm Max: 60.195mm (js13)
Recommended shaft tolerance:  Min: 29.959mm Max: 29.98mm (f7)
Recommended housing tolerance:  Min: 50mm Max: 50.025mm (H7)
ID when fitted:  Min: 30mm Max: 30.021mm (H7)
Recommended fitting pin tolerance:  Min: 30.008mm Max: 30.017mm (m5)

Alternative or equivalent part numbers: AM3050-60, AMC305060, QM38-30/50x60

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark