Recently Viewed

AL202615 Flanged Metric Oilite Bearing

AL202615 Flanged Metric Oilite Bearing
Our Price:  £3.43(Exc. 20% VAT)(£4.12 Inc. VAT)

Weight:  24.40 g


In stock, immediate despatch  


Special Offer:  Discounts of 5%, 10% and 20% are available when you order £50.00, £100.00 and £200.00 or more of selected products.

Model:  AL202615
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  20mm
Outside Diameter:  26mm
Length:  15mm
Flange Outside Diameter:  32mm
Flange Thickness:  3mm
ID tolerance:  Min: 20.007mm Max: 20.028mm (G7)
OD tolerance:  Min: 26.035mm Max: 26.056mm (s7)
Length tolerance:  Min: 14.865mm Max: 15.135mm (js13)
Flange OD tolerance:  Min: 31.805mm Max: 32.195mm (js13)
Flange thickness tolerance:  Min: 2.93mm Max: 3.07mm (js13)
Recommended shaft tolerance:  Min: 19.959mm Max: 19.98mm (f7)
Recommended housing tolerance:  Min: 26mm Max: 26.021mm (H7)
ID when fitted:  Min: 20mm Max: 20.021mm (H7)
Recommended fitting pin tolerance:  Min: 20.008mm Max: 20.017mm (m5)

Alternative or equivalent part numbers: AL2026-15, AMF202615, QFM18-15, FBM18x15, 20/26x15-32x3

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark