Recently Viewed

AM506035 Plain Metric Oilite Bearing

AM506035 Plain Metric Oilite Bearing
Our Price:  £19.52(Exc. 20% VAT)(£23.42 Inc. VAT)

Weight:  181.30g


In stock, immediate despatch  


Special Offer:  Discounts of 15%, 30%, 50% and 55% are available when you order £30.00, £100.00, £200.00 and £1,000.00 or more of selected products.

Model:  AM506035
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  50mm
Outside Diameter:  60mm
Length:  35mm
ID tolerance:  Min: 50.009mm Max: 50.034mm (G7)
OD tolerance:  Min: 60.059mm Max: 60.089mm (s7)
Length tolerance:  Min: 34.805mm Max: 35.195mm (js13)
Recommended shaft tolerance:  Min: 49.95mm Max: 49.975mm (f7)
Recommended housing tolerance:  Min: 60mm Max: 60.03mm (H7)
ID when fitted:  Min: 50mm Max: 50.025mm (H7)
Recommended fitting pin tolerance:  Min: 50.009mm Max: 50.02mm (m5)

Alternative or equivalent part numbers: AM5060-35, AMC506035, GM9X35, GH72X30, QM48-35, 50/60x35

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)


There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.



Oilite® is a USA, UK & EU Registered Trademark