Recently Viewed

AM162220 Plain Metric Oilite Bearing

AM162220 Plain Metric Oilite Bearing
Our Price:  £2.56(Exc. 20% VAT)(£3.07 Inc. VAT)
+

Weight:  21.50g

Availability:  

In stock, immediate despatch  

Oilite


Special Offer:  Discounts of 15%, 30%, 50% and 55% are available when you order £30.00, £100.00, £200.00 and £1,000.00 or more of selected products.

Model:  AM162220
Brand:  Oilite
Metric / Imperial:  Metric (mm)
Internal Diameter:  16mm
Outside Diameter:  22mm
Length:  20mm
ID tolerance:  Min: 16.006mm Max: 16.024mm (G7)
OD tolerance:  Min: 22.035mm Max: 22.056mm (s7)
Length tolerance:  Min: 19.835mm Max: 20.165mm (js13)
Recommended shaft tolerance:  Min: 15.966mm Max: 15.984mm (f7)
Recommended housing tolerance:  Min: 22mm Max: 22.021mm (H7)
ID when fitted:  Min: 16mm Max: 16.018mm (H7)
Recommended fitting pin tolerance:  Min: 16.007mm Max: 16.015mm (m5)

Alternative or equivalent part numbers: AM1622-20, AMC162220, CM28X20, CT264X20, QM28-20, 16/22x20

Standard Oilite(tm) Material is made from Oil impregnated sintered bronze.

The chemical composition for standard Oilite material is within the following:

Copper: Balance

Iron: 1% Max

Carbon: 3% Max

Tin: 9-11%

Max. Other Elements. 2%

Open Porosity Minimum: 20-27%

Minimum Oil Content: 18-24%

Minimum Radial Crushing Strength K: 120-180 N/mm2

Nominal Density: 6-7g/cc

Maximum static load: 35-65 N/mm2

Maximum dynamic load: 10-18 N/mm2

Maximum velocity: 5-6 m/s

Maximum PV factor*: 1.8

*PV factor = Pressure (N/mm2) x bearing surface velocity (m/s).

Pressure is calculated as load (N) / Projected area (internal diameter x Length) (mm)

 

There are several more specific specs for specific parts which fall within the above specification. please

contact us for more details if required.

 

 

Oilite® is a USA, UK & EU Registered Trademark